Controller Manuals & Support | HYPR Controllers

How to Remap HYPR Signature and Tournament Pro Reflex Buttons

Enter Remap Mode:

  1. HoldĀ R1 + R2 + L1 + L2Ā together forĀ 3ā€“5 seconds.

  2. TheĀ left light bar on the touchpadĀ will turnĀ ON, indicating you are in remap mode.

Assign a Button:

  1. Press and hold theĀ reflex buttonĀ you want to program.

  2. While holding it,Ā press the action buttonĀ you want to assign (e.g., X, O, Triangle, Square, L1, R1, L2, R2).

  3. Release both buttons ā€” the controller willĀ store the assignmentĀ instantly.

Save & Exit Remap Mode:

  • HoldĀ D-Pad UpĀ forĀ 3 secondsĀ until theĀ light bar turns off.

How To Disable Reflex Buttons / Flex Paddles

  1. Turn off controller

  2. Hold R2 + R3 simulteanously

  3. Power on the controller by either pressing the home button or connecting the USB Port to the controller

  4. LED will flash 5 times confirming reset. Your reflex buttons / paddles will now be unbound.Ā 

Ā 

Ā 

How to Remap HYPR Recon Reflex Buttons

Entering Remap Mode

  1. Press and hold the View buttonĀ (the small button near the left side of the controller).

  2. Hold forĀ 5 seconds.

  3. TheĀ LED behind the Home buttonĀ will light up:

    • Red / Blue / GreenĀ ā†’ Remap mode is active.

Assigning Reflex Buttons

  1. While in remap mode,Ā press and hold the reflex buttonĀ you want to program.

  2. Press the action/face buttonĀ you want to assign to it (A, B, X, Y, bumpers, triggers, etc.).

  3. Release both buttons.

  4. Repeat for each reflex button you want to assign.

Pro Tip:
Each reflex button can only be mapped toĀ one action buttonĀ at a time. Assigning a new action willĀ overwrite the previous mapping.

Saving & Exiting Remap Mode

  • When you're done,Ā press and hold the View button for 5 secondsĀ again.

  • The LED behind the Home button willĀ turn off, confirming your mappings are saved.

How To Disable Reflex ButtonsĀ 

  1. Turn on controller

  2. Enter remap mode as usual

  3. While in remap mode, hold view button again until you see the LED flashing.

  4. LED will flash 5 times confirming reset. Your reflex buttons will now be unbound.Ā